Fiber Ethernet Access Card Data Cable
Where used: To connect a multimode fiber (10Base-FL) Ethernet access card in an LS2020 chassis to another fiber Ethernet device.
Cisco Systems does not provide this cable; it is widely available from other vendors.
The LS2020 fiber Ethernet interfaces operate at a wavelength of 850 nanometers. Multimode cables should conform to the following specifications:
Standard: ISO/IEC 9314-3
Maximum path length (all cables in a connection, end to end): 2 km
Cabling: 62.5 micron core with an optical loss of 0-9 dB, or 50 micron core with an optical loss of 7 dB.
Note A single fiber link should not mix 62.5 and 50 micron cable.
Connector Type: ST
Note Protective covers are provided for all fiber Ethernet access cards and cable connectors. To shield connectors from dust and damage, keep covers in place on any connectors that are not being used.
Figure 3-29 illustrates the multimode fiber Ethernet access card data cable.
Figure 3-29: Multimode Fiber Ethernet Data Cable with ST Connectors
更多内容请看Cisco IOS技术手册、Cisco路由器配置手册、Cisco交换机专题专题，或进入讨论组讨论。
相关图文阅读
频道图文推荐
健 康 咨 询
时 尚 咨 询
相关专题
- Cisco IOS技术手册 (2995篇文章)
- Cisco路由器配置手册 (4742篇文章)
- Cisco交换机专题 (4251篇文章)
- 思科交换机配置 (4251篇文章)
- Cisco防火墙专题 (4604篇文章)
- Cisco认证体系专题 (3148篇文章)
- Cisco密码恢复专题 (3106篇文章)
- 思科 (2887篇文章)
- 线缆光纤 (1152篇文章)
- Cisco IOS (958次浏览)
- 以Catalyst 6509为主网络配置！ (388次浏览)
- [认证宝典]CISCO实验模拟器完全攻略 (279次浏览)
- Cisco VPN 客户端 (207次浏览)
- Catalyst 4003 的配置 (93次浏览)
- Cisco3550配置DHCP实例 (82次浏览)
- Cisco 2600系列 (62次浏览)
- Cisco路由器配置语句全攻略 (3次浏览)
- Cisco(思科)路由器上如何防止DDoS (2次浏览)
- Cisco和H3C交换设备 ARP病毒快速解决办法 (0次浏览)
