PPPoA配置说明

来源：作者：出处：巧巧读书 2006-07-25 进入讨论组

关键词：
server
cisco
dslam
word
wins

　　PC上配置PPPoA
　　Set IP addressing to automatically obtain an IP address.
　　
　　Set WINS to use DHCP for WINS resolution.
　　
　　Ensure that no default gateway is set.
　　

　　It may be necessary to set a domain name because DHCP cannot pass this information
　　
　　
　　Cisco CPE Configuration for PPPoA
　　cbos>enable
　　Password:
　　
　　cbos# set nat enable
　　NAT is now enabled
　　You must use "write" then reboot for changes to take effect.
　　
　　cbos# set ppp wan0-0 login
　　User name for wan0-0 has been set to testcpe.
　　
　　cbos# set ppp wan0-0 password
　　Password for wan0-0 has been set to cisco.
　　
　　cbos# set ppp wan0-0 ipcp 0.0.0.0
　　PPP wan0-0 IPCP Address set to 0.0.0.0
　　
　　cbos# set int wan0-0 close
　　cbos# set int wan0-0 vpi 1
　　
　　cbos# set int wan0-0 vci 32
　　
　　cbos# set int wan0-0 open
　　
　　cbos# set int eth0 address 172.22.10.254
　　eth0 ip address changed from 10.0.0.1 to 172.22.10.254
　　
　　cbos# set int eth0 netmask 255.255.255.0
　　eth0 netmask changed from 255.255.255.0 to 255.255.255.0
　　
　　cbos# set dhcp server enable
　　DHCP Server enabled
　　
　　cbos# set dhcp server pool 0 ip 172.22.10.0
　　Pool 0 IP parameter is now 172.22.10.0
　　
　　cbos# set dhcp server pool 0 netmask 255.255.255.0
　　Pool 0 netmask parameter is now 255.255.255.0
　　
　　cbos# set dhcp server pool 0 gateway 172.22.10.254
　　Pool 0 gateway parameter is now 172.22.10.254
　　
　　cbos# set password exec
　　Exec Password Change Successful!
　　
　　cbos# set password enable
　　Enable Password Change Successful!
　　
　　cbos# write
　　NVRAM written.
　　

　　Cisco DSLAM Configuration for PPPoA
　　hostname 6260
　　! Subtending Port - Will set as shutdown
　　interface atm0/2
　　shutdown
　　slot 1 atuc-1-4dmt
　　!
　　dsl-profile fast
　　dmt codeword-size downstream 16 upstream 16
　　dmt bitrate maximum interleaved downstream 8032 upstream 832
　　!
　　interface atm1/1
　　dsl profile fast
　　atm pvc 1 32 interface atm0/1 1 35
　　
　　
　　
　　
　　Cisco LS1010 Configuration for PPPoA
　　interface ATM 0/1/2
　　no ip address
　　no ip directed-broadcast
　　no ATM ilmi-keepalive
　　ATM pvp 1 interface ATM 0/0/2 1
　　
　　
　　
　　
　　Cisco 7200 Configuration for PPPoA
　　aaa new-model
　　AAA authentication ppp default local
　　!
　　!
　　username password
　　!
　　!
　　interface ATM 2/0.1 multipoint
　　no ip directed-broadcast
　　PVC 1/35
　　encapsulation aal5mux ppp Virtual-Template 2
　　!
　　!
　　interface FastEthernet 4/0
　　ip address 172.22.32.1 255.255.255.0
　　no ip directed-broadcast
　　!
　　!
　　interface Virtual-Template 2
　　ip unnumbered FastEthernet 4/0
　　no ip directed-broadcast
　　peer default ip address pool
　　ppp authentication pap
　　!
　　!
　　ip local pool 172.22.40.10 172.22.40.25通告:http://www.qqread.com/net-manage/c986175081.html