PE的OSPF 设置

来源：vlan9.com 作者： 出处：巧巧读书 2006-03-18 进入讨论组

• 关 键 词：
• loopback
• router
• ospf

Router1(config)# interface loopback 55

Router1(config-if)# ip vrf forwarding v1

Router1(config-if)# ip address 10.0.0.1 255.255.255.255

!

Router1(config)# router ospf 2 vrf v1

Router1(config-if)# log-adjacency-changes

Router1(config-if)# area 120 sham-link 10.0.0.1 10.44.0.1 cost 1

Router1(config-if)# redistribute bgp 1 subnets

Router1(config-if)# network 10.2.0.1 255.255.255.255 area 1

Router1(config-if)# network 10.120.0.0 0.255.255.255 area 120

Router1(config-if)# network 10.140.0.0 0.255.255.255 area 120

!

Router2(config)# interface loopback 44

Router2(config-if)# ip vrf forwarding v1

Router2(config-if)# ip address 44.0.0.1 255.255.255.255

!

Router2(config)# router ospf 2 vrf v1

Router2(config-if)# log-adjacency-changes

Router2(config-if)# area 120 sham-link 10.44.0.1 10.0.0.1 cost 1

Router2(config-if)# redistribute bgp 1 subnets

Router2(config-if)# network 10.2.0.1 255.255.255.255 area 1

Router2(config-if)# network 10.120.0.0 0.255.255.255 area 120

Router2(config-if)# network 10.140.0.0 0.255.255.255 area 120

本U R L:http://www.qqread.com/net-protocol/c341891308.html 更多内容请看OSPF路由协议专题、OSPF协议配置、OSPF协议专题，或进入讨论组讨论。

【收藏此文】【大 中 小】【打印】【关闭】

较早的文章：探讨关于OSPF的network配置

较新的文章：OSPF配置示例(1)