频道直达 - 专题 - 新闻 - 技巧 - 组网 - 开发 - 安全 - web编程 - 图像 - 操作系统 - 数据库 - 教育 - 旅游 - 健康 - 时尚 - 驱动 - 软件 - 游戏 - 多媒体 - ERP - 讨论组

VOIP的配置举例

来源:gotolab.com 作者: 出处:巧巧读书 2007-12-12 进入讨论组
谢 谢 收 藏 http://www.qqread.com/network-special/i451295118.html
  复杂的VOIP配置
  一、 拓扑图
  、中心
  Zongbu#sh run
  Building configuration...
  
  Current configuration : 2216 bytes
  !
  version 12.2
  service timestamps debug uptime
  service timestamps log uptime
  no service password-encryption
  !
  hostname Zongbu
  !
  enable password cisco
  !
  !
  class-map match-all voice
  match access-group 102
  !
  access-list 102 permit udp any any range 16384 32767
  access-list 102 permit tcp any any eq 1720
  access-list 102 permit tcp any eq 1720 any
  !
  policy-map qos
  class voice
  priority 40
  class class-default
  fair-queue
  !
  voice-card 1
  !
  ip subnet-zero
  !
  !
  no ip domain-lookup
  !
  !
  !
  !
  !
  !
  !
  !
  !
  controller E1 1/0
  framing NO-CRC4
  ds0-group 0 timeslots 17-31 type r2-digital r2-compelled
  ds0-group 1 timeslots 1-15 type r2-digital r2-compelled
  cas-custom 0
  unused-abcd 0 0 1 1
  country china
  dnis-digits min 4 max 8
  cas-custom 1
  unused-abcd 0 0 1 1
  country china
  dnis-digits min 4 max 8
  !
  !
  !
  !
  interface FastEthernet0/0
  ip address 10.22.110.248 255.255.255.0
  ip rip send version 2
  duplex auto
  speed auto
  !
  interface Serial0/0
  description Connected to Fenzhi1
  ip address 10.22.118.9 255.255.255.252
  service-policy output qos
  !
  interface Serial0/1
  description Connected to Fenzhi2
  ip address 10.22.118.13 255.255.255.252
  service-policy output qos
  !
  router ospf 100
  log-adjacency-changes
  redistribute static subnets
  redistribute rip subnets
  network 10.22.110.248 0.0.0.0 area 0
  network 10.22.118.9 0.0.0.0 area 0
  network 10.22.118.13 0.0.0.0 area 0
  !
  router rip
  version 2
  redistribute ospf 100 metric 2
  network 10.0.0.0
  default-metric 2
  !
  ip classless
  ip route 10.0.0.0 255.0.0.0 10.22.110.253
  ip route 10.22.108.0 255.255.255.0 10.22.110.254
  ip route 10.22.109.0 255.255.255.0 10.22.110.254
  ip http server
  ip pim bidir-enable
  !
  !
  call rsvp-sync
  !
  voice-port 1/0:0
  !
  voice-port 1/0:1
  !
  !
  mgcp profile default
  !
  dial-peer cor custom
  !
  !
  !
  dial-peer voice 10 voip
  description Phone to Fenzhi1
  destination-pattern 6964....
  session target ipv4:10.22.118.10
  dtmf-relay cisco-rtp h245-signal h245-alphanumeric
  fax rate 9600
  !
  dial-peer voice 20 voip
  description Phone to Fenzhi2
  destination-pattern 6962....
  session target ipv4:10.22.118.14
  dtmf-relay cisco-rtp h245-signal h245-alphanumeric
  fax rate 9600
  !
  dial-peer voice 30 pots
  destination-pattern 6491....
  direct-inward-dial
  port 1/0:0
  !
  dial-peer voice 40 pots
  destination-pattern 1.
  direct-inward-dial
  port 1/0:1
  forward-digits all
  !
  dial-peer voice 60 pots
  destination-pattern 9481....
  direct-inward-dial
  port 1/0:0
  forward-digits all
  !
  !
  line con 0
  line aux 0
  line vty 0 4
  password cisco
  login
  !
  2、分支1
  Fenzhi 1#sh run
  Building configuration...
  
  Current configuration : 1161 bytes
  !
  version 12.2
  service timestamps debug uptime
  service timestamps log uptime
  no service password-encryption
  !
  hostname Fenzhi1
  !
  enable password cisco
  !
  !
  !
  ip subnet-zero
  !
  
  class-map match-all voice
  match access-group 102
  !
  access-list 102 permit udp any any range 16384 32767
  access-list 102 permit tcp any any eq 1720
  access-list 102 permit tcp any eq 1720 any
  !
  policy-map qos
  class voice
  priority 40
  class class-default
  fair-queue
  !
  !
  !
  interface Ethernet0/0
  ip address 10.22.115.254 255.255.255.0
  half-duplex
  !
  interface Serial0/0
  ip address 10.22.118.10 255.255.255.252
  service-policy output qos
  !
  router ospf 100
  log-adjacency-changes
  network 10.22.115.254 0.0.0.0 area 0
  network 10.22.118.10 0.0.0.0 area 0
  !
  ip classless
  ip http server
  ip pim bidir-enable
  !
  !
  call rsvp-sync
  !
  voice-port 1/0/0
  !
  voice-port 1/0/1
  !
  !
  mgcp profile default
  !
  dial-peer cor custom
  !
  !
  !
  dial-peer voice 10 voip
  destination-pattern 6491....
  session target ipv4:10.22.118.9
  dtmf-relay cisco-rtp h245-signal h245-alphanumeric
  fax rate 9600
  !
  dial-peer voice 20 pots
  preference 2
  destination-pattern 6964....
  port 1/0/0
  !
  dial-peer voice 30 pots
  preference 5
  destination-pattern 6964....
  port 1/0/1
  !
  dial-peer voice 40 voip
  destination-pattern 6962....
  session target ipv4:10.22.118.14
  dtmf-relay cisco-rtp h245-signal h245-alphanumeric
  fax rate 9600
  !
  !
  line con 0
  line aux 0
  line vty 0 4
  password cisco
  login
  !
  !
  end 更多文章 更多内容请看电脑配置手册服务器配置专栏VoIP技术专题专题,或进入讨论组讨论。
收藏此文】【 】【打印】【关闭
相关图文阅读
频道图文推荐
健 康 咨 询
时 尚 咨 询
巧巧读书宗旨
相关专题
讨论组问题推荐
站内各频道最新更新文档
站内最新制作专题
热门关键字导读
Photoshop教 程照片处理 照片制作 PS快捷键 抠图
计 算 机 故 障XP系统修复
艺 术 与 设 计设计 流媒体 设计欣赏 边框
计 算 机 安 全ARP
站内频道文章精选
巧巧电脑频道编辑信箱  告诉我们您想看的专题或文章