频道直达 - 专题 - 新闻 - 技巧 - 组网 - 开发 - 安全 - web编程 - 图像 - 操作系统 - 数据库 - 教育 - 旅游 - 健康 - 时尚 - 驱动 - 软件 - 游戏 - 多媒体 - ERP - 讨论组

Slackware10.2做NAT服务器

来源:qqread 作者: 出处:巧巧读书 2007-01-13 进入讨论组
    前提很明确,在中小型企业的内部网络中用iptables做一个简单的NAT服务器共享上网,由于网络流量的限制使用ipp2p模块禁止P2P下载保证日常工作的正常。
准备工作:
安装好Slackware10.2,升级内核至2.6.1*,不保证在2.4内核下成功应用。
下载附件:

iptables-1.3.3.tar.bz2 http://www.netfilter.org/
l7-protocols-2006-04-09.tar.gz http://l7-filter.sourceforge.net/
netfilter-layer7-v2.1.tar.gz http://l7-filter.sourceforge.net/
ipp2p-0.8.0.tar.gz http://ipp2p.org/

HTML 代码:
# wget http://ftp.netfilter.org/pub/iptables/iptables-1.3.5.tar.bz2 # wget http://superb-west.dl.sourceforge.net/sourceforge/l7-filter/netfilter-layer7-v2.2.tar.gz # wget http://superb-west.dl.sourceforge.net/sourceforge/l7-filter/l7-protocols-2006-06-03.tar.gz # wget http://ipp2p.org/downloads/ipp2p-0.8.0.tar.gz # tar xvf iptables-1.3.5.tar.bz2 -C /usr/src/ # ln -s /usr/src/iptables-1.3.5 # tar xvf l7-protocols-2006-06-03.tar.gz -C /usr/src/ # tar xvf netfilter-layer7-v2.2.tar.gz -C /usr/src/ # tar xvf ipp2p-0.8.0.tar.gz -C /usr/src/

然后开始给内核打上补丁,然后重新编译内核。

HTML 代码:
# cd /usr/src/linux # patch -p1 < ../netfilter-layer7-v2.2/kernel-2.6.13-2.6.16-layer7-2.2.patch # make menuconfig Networking ---> Networking options --->[*] Network packet filtering (replaces ipchains) ---> IP: Netfilter Configuration ---> <M> Layer 7 match support (EXPERIMENTAL) [*] Layer 7 debugging output # time make –j 2 # make modules_install # cp arch/i386/boot/bzImage /boot/vmlinuz-2614 # lilo # reboot

Reboot以后给iptables打上补丁。

HTML 代码:
# cd /usr/src/iptables # patch -p1 < /usr/src/netfilter-layer7-v2.2/iptables-layer7-2.2.patch # chmod 755 extensions/.layer7-test # export KERNEL_DIR=/usr/src/linux # export IPTABLES_DIR=/usr/src/iptables-1.3.5/ # make PREFIX=/usr/local/iptables/ LIBDIR=/lib/iptables/ BINDIR=/sbin # make PREFIX=/usr/local/iptables/ LIBDIR=/lib/iptables/ BINDIR=/sbin install


然后是安装l7-filter协议文件:

HTML 代码:
cd /usr/src/l7-protocols-2006-06-03/ Make install

只是CP了几个文件到/etc/里面,最后一步就是安装ipp2p了。
HTML 代码:
# cd /usr/src/ipp2p-0.8.0/ # vi Makefile :36 ifeq ($(IPTABLES_SRC),) IPTABLES_SRC = /usr/src/iptables-1.3.5 endif # make # # cp libipt_ipp2p.so /usr/local/lib/iptables/ # insmod ipt_ipp2p.o # depmod -a # cp libipt_ipp2p.so /lib/iptables/ # insmod ipt_ipp2p.ko # depmod -a

这个时候应该就OK了,
# iptables -m layer7 --help
# iptables -m ipp2p --help保留地址 http://www.qqread.com/network/server/f293144.html 更多文章 更多内容请看FTP服务器双核服务器技术网站服务器的选型专题,或进入讨论组讨论。
收藏此文】【 】【打印】【关闭
相关图文阅读
频道图文推荐
健 康 咨 询
时 尚 咨 询
巧巧读书宗旨
相关专题
讨论组问题推荐
站内各频道最新更新文档
站内最新制作专题
热门关键字导读
Photoshop教 程照片处理 照片制作 PS快捷键 抠图
计 算 机 故 障XP系统修复
艺 术 与 设 计设计 流媒体 设计欣赏 边框
计 算 机 安 全ARP
站内频道文章精选
巧巧电脑频道编辑信箱  告诉我们您想看的专题或文章