ipv6 的rip 路由配置

来源：vlan9收集作者：出处：巧巧读书 2005-08-22 进入讨论组

Rack01R3#sh ru int lo10
Building configuration...

Current configuration : 104 bytes
!
interface Loopback10
no ip address
ipv6 address 2003::3/64
ipv6 enable
ipv6 rip Cisco enable
end

Rack01R3#sh ru int e0
Building configuration...

Current configuration : 103 bytes
!
interface Ethernet0
no ip address
ipv6 address 2001::3/64
ipv6 enable
ipv6 rip Cisco enable
end

(config)#
!
ipv6 unicast-routing
!
!
ipv6 router rip Cisco
!
-------------------------------(debug info)-------------------------------------------

*Mar 1 00:51:33.019: RIPng: Triggered update requested
*Mar 1 00:51:33.775: %SYS-5-CONFIG_I: Configured from console by console
Rack01R1#
*Mar 1 00:51:34.019: RIPng: generating triggered update for Cisco
*Mar 1 00:51:34.019: RIPng: Sending multicast update on Ethernet0 for Cisco
*Mar 1 00:51:34.023:        src=FE80::260:5CFF:FEF4:CD0A
*Mar 1 00:51:34.027:        dst=FF02::9 (Ethernet0)
*Mar 1 00:51:34.027:        sport=521, dport=521, length=32
*Mar 1 00:51:34.031:        command=2, version=1, mbz=0, #rte=1
*Mar 1 00:51:34.031:        tag=0, metric=1, prefix=2001::/64
Rack01R1#
*Mar 1 00:51:46.987: RIPng: response received from FE80::250:73FF:FE6C:6813 on Ethernet0 for Cisco
*Mar 1 00:51:46.991:        src=FE80::250:73FF:FE6C:6813 (Ethernet0)
*Mar 1 00:51:46.995:        dst=FF02::9
*Mar 1 00:51:46.995:        sport=521, dport=521, length=52
*Mar 1 00:51:46.999:        command=2, version=1, mbz=0, #rte=2
*Mar 1 00:51:46.999:        tag=0, metric=1, prefix=2001::/64
*Mar 1 00:51:47.003:        tag=0, metric=1, prefix=2003::/64
*Mar 1 00:51:47.003: RIPng: Added neighbour FE80::250:73FF:FE6C:6813/Ethernet0
*Mar 1 00:51:47.007: RIPng: Inserted 2001::/64, nexthop FE80::250:73FF:FE6C:6813, metric 2, tag 0
Rack01R1#
*Mar 1 00:51:47.015: RIPng: Inserted 2003::/64, nexthop FE80::250:73FF:FE6C:6813, metric 2, tag 0
*Mar 1 00:51:47.019: RIPng: Triggered update requested
*Mar 1 00:51:48.019: RIPng: generating triggered update for Cisco
*Mar 1 00:51:48.023: RIPng: Suppressed null multicast update on Ethernet0 for Cisco
Rack01R1#
*Mar 1 00:51:53.027: RIPng: Sending multicast update on Ethernet0 for Cisco
*Mar 1 00:51:53.031:        src=FE80::260:5CFF:FEF4:CD0A
*Mar 1 00:51:53.031:        dst=FF02::9 (Ethernet0)
*Mar 1 00:51:53.035:        sport=521, dport=521, length=52
*Mar 1 00:51:53.039:        command=2, version=1, mbz=0, #rte=2
*Mar 1 00:51:53.039:        tag=0, metric=1, prefix=2001::/64
*Mar 1 00:51:53.043:        tag=0, metric=1, prefix=2010::/64

------------------------(ipv6 route table)--------------------------------------

Rack01R1#sh ipv6 route ri
IPv6 Routing Table - 6 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
       U - Per-user Static route
       I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea
       O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
R   2003::/64 [120/2]
     via FE80::250:73FF:FE6C:6813, Ethernet0
解释:
环境为R1-----R3的E0口连接,分别启用loopback10接口,在全局模式下启用ipv6 unicast-routing ，和ipv6 rip 路由进程；在接口启用ipv6 enable,并且在接口启用ipv6 rip的路由。需要注意的地方，ipv6 rip Cisco, Cisco是进程的表示。在接口下的rip路由要与进程中的表识相同，并且大小写敏感。
文字：http://www.qqread.com/route/b791293008.html 更多内容请看路由安全配置专题、IPV6专题、电脑配置手册专题，或进入讨论组讨论。